Same-day and emergency appointments

Up-front pricing before any work starts

Licensed, insured, background-checked technicians

Written safety report after every visit

4.9 out of 5689 customer reviews · Google, Facebook & HomeStars combined

Richmond Hill, York Region

Furnace Installation & Replacement in Richmond Hill

Right-sized, correctly vented high-efficiency furnace replacement with a heat-loss calculation.

Most furnaces in Ontario are replaced with whatever size the old one was, which is how homes end up with an oversized unit that short-cycles for twenty years. We run a heat-loss calculation on your actual house before quoting a size.

(647) 000-0000

Furnace Installation in Richmond Hill

Send the symptom and your postal code — we'll confirm an arrival window.

No obligation. We never share your details.

Local context

Furnace Installation for Richmond Hill homes

Richmond Hill runs colder than the lakeshore, and marginally undersized furnaces that coped downtown struggle here. Sizing to the actual heat loss of your home matters more north of Elgin Mills than almost anywhere in the GTA.

An oversized furnace heats the thermostat quickly and the house unevenly, cycles constantly, wears its igniter and inducer prematurely, and never runs long enough at low fire to be efficient. A correctly sized modulating unit runs longer at lower output and holds temperature far more evenly — the comfort difference is usually more noticeable than the fuel saving.

Replacing a mid-efficiency furnace with a condensing one changes the venting entirely. The new unit vents in plastic through a sidewall, which orphans the water heater on the old masonry chimney and often requires a liner. Quotes that ignore that are quotes that will cost you again later. Ours includes the venting work, the permit and the inspection, and we hand over a commissioning sheet with gas pressure, temperature rise and static pressure recorded.

A replacement is only as good as the load calculation behind it. We size to the house — square footage, insulation, window area, air leakage and the duct system you already have — rather than matching the badge on the old unit. Most furnaces we replace were oversized when installed, and an oversized condensing furnace short-cycles, never reaches steady-state efficiency and wears its ignition components out early. Right-sizing typically means a smaller and quieter unit than the one coming out.

The parts of the job that get skipped by low quotes are the ones that determine whether the installation lasts: a correctly sized return, sealed and supported venting at the right slope, a proper condensate route with neutralisation where required, a new gas connection and shut-off, and commissioning readings recorded at the end. We file the permit, book the inspection and leave you the manufacturer registration completed so the warranty is actually valid.

What the housing stock in Richmond Hill means for this job

Oak Ridges and Jefferson sit on and around the moraine with larger lots, mature trees and a high proportion of homes with fireplaces and secondary heating. Bayview Hill and Rouge Woods are 1990s executive subdivisions, and the Mill Pond and Crosby areas hold the older, smaller core stock. For furnace installation, that matters because the work concentrates on sizing, venting and commissioning — and that is exactly what changes between a Observatory property and a newer build in Crosby.

Timing in Richmond Hill

Planned replacements are cheapest and easiest to schedule in spring and early autumn; emergency replacements in January cost more and offer far less choice of equipment. undefined This is one of the coldest parts of the GTA we serve. Elevation on the Oak Ridges Moraine means longer heating seasons, deeper frost and more snow-load events than the lakeshore, and equipment sized for a Toronto load will run at capacity here.

What it costs here

Efficiency tier and staging drive equipment cost; venting changes, duct or return modifications and permit work drive installation cost. Larger lots and long driveways add travel and setup time in winter, and mature tree cover around Oak Ridges and Mill Pond drives both gutter volume and roof-access difficulty well above the GTA average.

Permits and jurisdiction

Town of Richmond Hill issues building and mechanical permits, York Region handles water and wastewater, and gas work is TSSA-regulated. Tree protection rules on the moraine can affect exterior equipment placement.

Call now, or book it in?

Call now

  • A cracked heat exchanger confirmed by inspection
  • Repeated CO alarm activations
  • A furnace over twenty years old that has failed mid-winter

Can be scheduled

  • Rising repair frequency on a unit past fifteen years
  • Uneven heating that a repair has not solved
  • Planning ahead before next heating season

How a Richmond Hill visit runs

  1. 1Heat-loss calculationRoom-by-room sizing based on your actual insulation, windows and orientation — not the old unit's badge.
  2. 2Written optionsTwo or three real options with efficiency, sound rating and total installed price. No pressure close.
  3. 3Venting planSidewall venting, condensate route and what happens to the water heater's flue, all specified before install day.
  4. 4Install & permitOne-day changeover in most homes, permit filed and inspection arranged.
  5. 5CommissionGas pressure, temperature rise, static pressure and combustion readings recorded and left with you.

What affects furnace installation pricing in Richmond Hill

  • Output capacity and efficiency tier, and whether the blower is single-stage, two-stage or modulating
  • Whether the changeover requires new sidewall venting and a chimney liner for the water heater
  • Condensate drainage — a basement without a nearby drain needs a condensate pump
  • Existing ductwork condition and whether the plenum and return need modification
  • Available manufacturer and utility rebates, which we apply for on your behalf

FAQ

Furnace Installation questions from Richmond Hill homeowners

How long does a furnace replacement take?

A straight changeover is a single day. Adding sidewall venting, a chimney liner for the water heater or ductwork modification can extend it to two.

What size furnace do I need?

The only honest answer comes from a heat-loss calculation on your specific home. Matching the old unit's size perpetuates whatever sizing error was made the first time, and in {city} that error is usually oversizing.

Do I need a permit to replace a furnace?

Yes, and we file it. A permitted, inspected install protects your manufacturer warranty and matters at resale.

Are there rebates available?

Manufacturer and utility programs change through the year. We check what is active at the time of your quote and handle the paperwork rather than leaving you to claim it.

What size furnace do homes like mine here usually need?

Oak Ridges and Jefferson sit on and around the moraine with larger lots, mature trees and a high proportion of homes with fireplaces and secondary heating. Bayview Hill and Rouge Woods are 1990s executive subdivisions, and the Mill Pond and Crosby areas hold the older, smaller core stock. On a furnace installation visit in Observatory, Crosby, Rouge Woods or anywhere else in Richmond Hill, we work from what the house actually is rather than a standard checklist — sizing, venting and commissioning gets assessed on the property, and you get the readings in writing.

When is the best time of year to replace a furnace here?

Planned replacements are cheapest and easiest to schedule in spring and early autumn; emergency replacements in January cost more and offer far less choice of equipment. This is one of the coldest parts of the GTA we serve. Elevation on the Oak Ridges Moraine means longer heating seasons, deeper frost and more snow-load events than the lakeshore, and equipment sized for a Toronto load will run at capacity here. We cover Richmond Hill from Observatory through Rouge Woods, and also serve 3 neighbouring municipalities, so scheduling outside a demand spike usually means a same-week window.

Pricing

How much does this cost in Richmond Hill?

Typical range is $3,800 – $8,200 installed. Get a number for your own home in about a minute with our instant estimator.

Furnace Installation in Richmond Hill, booked today

Call for the fastest response, or send a request and we'll confirm your arrival window.

(647) 000-0000
Call Now